racing bike wheels
racing bike wheels
Racing bikes are good bikes and they all have similar traits to them. The light weight frame that you might have to your bike may be made of some light weight metal such as aluminum. The wheels that you are riding on called tires are made to be able to withstand high pressures. The handle bars are slightly lower than usual and the gears and brakes may be in a cluster so you don’t have to take your hands off the grips anytime.
If you just like to simply go on an easy going bike ride, than more than likely a racing type of bike isn’t for you. The bike and its wheels are made smaller for lighter weight and the breaks are made for light weight also and not a quick stop so you may want another bike like a mountain bike. The gear ratio is probably going to be a lot longer on a racing bike to gain speed but you can get another bike such as the mountain bike that you can climb steep hills and mountains with, with ease.
With a light weight frame that you can pick up with one hand and the tight positions you may have to sit will make you accelerate at high speeds higher than a normal bike. The way the bike is made is to limit the wind and create a good position for the rider. With owning a racing bike they can reach pretty high speeds up to 35 mph I would say or at least what I have seen. They might be able to go even faster but I am not a bike rider fan so I wouldn’t know.
Another thing that racing bikes don’t have that a regular bike would is mud flaps to keep you from getting mud all over the back of your legs and bottom. Mudguards are good when riding in a dirt environment or a muddy road. As I stated this is also a choice that goes with a regular bike and not available in racing bikes.
Although you might have been thinking of getting a racing bike, and might have had the rack up for it in the garage already. It might not be the bike for you if you just like to go on easy rides and not fast speedy races. Other people may prefer to challenge their friends or family when owning a racing bike, but the family just may like the regular bikes too. Just choose whichever bike is right for you and what you want out of it. Don’t get the bike that you just want to have to own, get the bike that’s right for you and that you will enjoy riding.
About the Author:
Gregg Hall is an author living with his beautiful wife and family in Navarre Beach, Florida. Find more about bicycle accessories as well as bicycle clothing at http://www.bicyclepartsandclothing.com
Article Source: ArticlesBase.com – How To Choose The Best Urban Road Bike For You
Can I fit racing bike wheels (eg 700c) to a mountain bike frame?
my situation: I need a new bike and would love my next bike to be light and fast.
my plan: 2nd hand aluminium mountain-bike frames seem to be far cheaper than 2nd hand racing-bike frames. If I buy a mountain bike frame, could I fit racing-bike wheels to it? Would there be any major structural problems with this?
I just like cycling around town, and day trips in the countryside. I don’t mind if the bike isn’t triathlon standard 
Thanks!
As others have stated, you are out of luck. Here’s why: wheels are actually measured by the outside diameter of the inflated tire. So, a 700c wheel with inflated tire is only a bit larger than a 26″ wheel with inflated tire. But… As you know, a 700c tire is quite narrow, while a 26″ tire is quite fat. This translates into a very large difference in the diameter of a 26″ rim and a 700c rim. Thus, even if the width of the wheel hubs matched, you are almost certainly not going to be able to get the brake pads of the mountain bike to hit the braking surface on the rim. Furthermore, there may not be clearance for the larger 700c wheel and the frame.
The least expensive option to acheive your goal is to get some narrow, high pressure, road tires for your mountain bike. You can even put clip on aero bars on your mountain bike for the best aerodynamics.
Hope this helps you out.
Bike Riding for Advanced Cyclists : Bike Racing Wheels